Our Product

Brass

Introduction

Brass

Brass is a low-friction, soft, non-ferrous metal which is easily drilled, machined, sawed and punched. Brass is an excellent choice for components in which corrosion-resistance is important.

Description

Why Our Brass?

TSA Industries provides our customers with the best service possible! We will continue to strive to make TSA Industries your first choice for the best products, lighting fast shipping, and superior customer service.

Brass – an alloy of copper and zinc – is one of the most widely used alloys. Known for its decorative attributes and bright gold appearance, brass also exhibits durability, corrosion resistance, and high electrical conductivity.

SHAPE OF BRASS

Brass is a common useful metal, Brass is available in rods, bars, sheets, tubes and pipes .

Variation

Brass Flat Bar

Brass FLAT bar is often used where corrosion resistance, electrical conductivity or non-sparking is required. It is also valued as a decorative trim due to its typical golden brass color.

Brass Square Bar

Brass square bar is commonly used to make musical instruments due to its high workability and durability. It is also frequently used in applications where low friction is required. This material is measured by taking its thickness or its width which are the same.

Brass Rod

Brass Rod. Solid brass rods are strong pieces of brass that can be cut to a specific length and diameter for use in applications where corrosion resistance and electrical conductivity are both important.

Brass Hexagon Bar

Brass Hex bars are commonly used in corrosive environments, mechanical or architectural applications, gears or lock components, and ornamental projects.

Brass Plate

Created by alloying copper and zinc, brass exhibits high corrosion resistance, good durability, and high electrical conductivity, along with a shiny, decorative appearance. Brass sheet and brass plate are generally very easy to cut, machine, and fabricate. Brass plate is commonly used for decorative purposes primarily because of its resemblance to gold.

Brass Shim

A brass shim is a thin piece of brass material that can be used as a wedge to fill small spaces or gaps between two objects or surfaces that normally join. Shims can also be used to make a surface flush or level. Brass shim is often used where a level of stiffness is still required, making it highly versatile.

Brass Pipe

Brass Pipe is one of the metal pipe types used primarily in water lines and plumbing. The pipes are also used in oil and gas, steam pipes and in hot water.

Brass Flat Bar

Brass FLAT bar is often used where corrosion resistance, electrical conductivity or non-sparking is required. It is also valued as a decorative trim due to its typical golden brass color.

PRODUCTS STANDARD AND SPECIFICATIONS

JIS – H – 3250 – C 3604

CHEMICAL COMPOSITION
COPPER	LEAD	ZINC
58%	4%	38%

MECHANICAL PROPERTIES
SIZE	TENSILE STRENGTH	ELONGATION (%)	HARDNESS HV	SHEARING STRENGTH
1-13MM	495	20	160	310
13-50MM	430	27	135	280
50MM and ABOVE	400	35	110	250

PRODUCTS APPLICATIONS

To make musical instruments
Electrical Conductivity
To making frames, grates and other parts
Base plates and decorative works
Braces and Housewares
Rails and Handles
Bearings
Furniture making
Caravan construction
Wear strips, model making and other decorative uses.

SIZE RANGE

NO	THICKNESS	WDTH	NO	THICKNESS	WDTH	NO	THICKNESS	WDTH	NO	THICKNESS	WDTH
1	1/16”	1/2”	23	3/16”	2”	45	3/8”	4”	66	5/8”	6”
2	1/16”	3/4”	24	3/16”	21/2”	46	3/8”	5”	67	3/4”	1”
3	1/16”	1”	25	3/16”	3”	47	3/8”	6”	68	3/4”	1 1/4”
4	1/16”	1 1/4”	26	3/16”	4″	48	1/2”	3/4”	69	3/4”	1 1/2”
5	1/16”	1 1/2”	27	1/4″	1/2”	49	1/2”	1”	70	3/4”	2”
6	1/16”	2”	28	1/4″	3/4″	50	1/2”	1 1/4”	71	3/4”	2 1/2”
7	1/8”	1/4”	29	1/4″	1”	51	1/2”	1 1/2”	72	3/4”	3”
8	1/8”	3/8”	30	1/4″	1 1/4”	52	1/2”	2”	73	3/4”	4”
9	1/8”	1/2”	31	1/4″	1 1/2”	53	1/2”	2 1/2”	74	3/4”	5”
10	1/8”	3/4”	32	1/4″	2”	54	1/2”	3”	75	3/4”	6”
11	1/8”	1”	33	1/4″	2 1/2”	55	1/2”	4”	76	1”	1 1/2”
12	1/8”	1 1/4”	34	1/4″	3”	56	1/2”	5”	77	1”	2”
13	1/8”	1 1/2”	35	1/4″	4”	57	1/2”	6”	78	1”	2 1/2”
14	1/8”	2”	36	1/4″	5”	58	5/8”	1”	79	1”	3”
15	1/8”	2 1/2”	37	1/4″	6”	59	5/8”	1 1/4”	80	1”	4”
16	1/8”	3”	38	3/8”	3/4″	60	5/8”	1.5”	81	1”	5”
17	1/8”	4”	39	3/8”	1”	61	5/8”	2”	82	1”	6”
18	3/16”	1/2”	40	3/8”	1 1/4”	62	5/8”	2 1/2”	83	1 1/2”	3”
19	3/16”	3/4″	41	3/8”	1 1/2”	63	5/8”	3”	84	1 1/2”	4”
20	3/16”	1	42	3/8”	2”	64	5/8”	4”	85	1 1/2”	6”
21	3/16”	1 1/4″	43	3/8”	2 1/2”	65	5/8”	5”	86	2”	6”
22	3/16”	1 1/2”	44	3/8”	3”

Brass Square Bar

PRODUCTS STANDARD AND APPLICATIONS

JIS – H – 3250 – C 3604

CHEMICAL COMPOSITION
COPPER	LEAD	ZINC
58%	4%	38%

MECHANICAL PROPERTIES
SIZE	TENSILE STRENGTH	ELONGATION (%)	HARDNESS HV	SHEARING STRENGTH
1 – 13MM	495	20	160	310
13 – 50MM	430	27	135	280
50MM and ABOVE	400	35	110	250

PRODUCTS APPLICATIONS

• To make musical instruments
• Electrical Conductivity
• To making frames, grates and other parts
• Base plates and decorative works
• Braces and Housewares
• Rails and Handles
• Bearings
• Furniture making
• Caravan construction
• Wear strips, model making and other decorative uses.

SIZE RANGE

WIDTH : 1/8” TO 6”, LENGTH : 3.66 METER

Brass Rod

PRODUCT STANDARD AND APPLICATIONS

JIS – H – 3250 – C 3604

CHEMICAL COMPOSITION
COPPER	LEAD	ZINC
58%	4%	38%

MECHANICAL PROPERTIES
SIZE	TENSILE STRENGTH	ELONGATION (%)	HARDNESS HV	SHEARING STRENGTH
1 – 13MM	495	20	160	310
13 – 50MM	430	27	135	280
50MM and ABOVE	400	35	110	250

PRODUCTS APPLICATIONS

* Automobile synchronizer gear rings

* Marine pumps

* Valves and parts

* friction accessories

* Connectors

* Flanges

* Machine parts

* Gas valves and fittings

* decorative architecture

* Engineering

* Many types of Fasterner

SIZE RANGE

DIAMETER : 1/8” TO 235MM (CUSTOM SIZES ARE REQUESTED BASED ON MOQ)

LENGTH : 2.5METER OR 3.6METER

Brass Hexagon Bar

Brass Hex bars are commonly used in corrosive environments, mechanical or architectural applications, gears or lock components, and ornamental projects.

PRODUCT STANDARD AND APPLICATIONS

JIS – H – 3250 – C 3604

CHEMICAL COMPOSITION
COPPER	LEAD	ZINC
58%	4%	38%

MECHANICAL PROPERTIES
SIZE	TENSILE STRENGTH	ELONGATION (%)	HARDNESS HV	SHEARING STRENGTH
1 – 13MM	495	20	160	310
13 -50MM	430	27	135	280
50MM and ABOVE	400	35	110	250

PRODUCTS APPLICATIONS

* Bolds & Nuts

* Repetition turned parts

* Electrical Components

* Lock

* Plumbing Fittings

SIZE RANGE

DIAMETER : 3/16” TO 4”

LENGTH : 2.5METER OR 3.6METER

Brass Plate

PRODUCTS STANDARD AND APLLICATIONS

JIS-H-3100-C2801P-1/2 HARD

CHEMICAL COMPOSITION
COPPER	LEAD	IRON	IRON
62%	0.10%	0.07%	REMAIN

MECHANICAL PROPERTIES
SIZE	TENSILE STRENGTH	ELONGATION(%	HARDNESS HV	MELTING POINT C
ALL SIZES	450	15	160	880

PRODUCTS APPLICATIONS

* Household Items

* Doorknobs

* Water Fixtures

* Towel Bars

* Fastener and Fittings

* Brackets

* Door plates

* Domestic interior fittings

* Electrical and plumbing components

* Architectural fascia’s

SIZE RANGE

THICKNESS : 0.40MM TO 2”

DIMENSION : 2FT x 4FT , 4FT x 8FT

Brass Shim

PRODUCT STANDARD AND SPECIFICATION

C-2801 P

SIZE RANGE:

THICKNESS: 0.05MM TO 1MM
WIDTH:152.4MM TO 304.8MM

PRODUCT APPLICATIONS

* Fill gaps
* Align components that need to be assembled with precision
* Make a surface flush or level

No：	THICKNESS		WIDTH
	MM	INCH
1	0.050	0.002	152.40mm (6”)
2	0.076	0.003	152.40mm (6”)
3	0.101	0.004	152.40mm (6”)
4	0.127	0.005	152.40mm (6”)
5	0.150	0.006	152.40mm (6”)
6	0.177	0.007	152.40mm (6”)
7	0.200	0.008	152.40mm (6”)
8	0.250	0.010	152.40mm (6”)
9	0.300	0.012	152.40mm (6”)
10	0.380	0.015	152.40mm (6”)
11	0.500	0.020	152.40mm (6”)
12	0.600	0.025	152.40mm (6”)
13	0.800	0.030	152.40mm (6”)
14	1.000	0.040	152.40mm (6”)

Brass Pipe

Brass Pipe is one of the metal pipe types used primarily in water lines and plumbing. The pipes are also used in oil and gas, steam pipes and in hot water.

PRODUCT STANDARD AND SPECIFICATION

JIS H 3300 C 20700 ½ HARD

SIZE RANGE:

DIAMETER: Ø ¼” TO Ø 4”
LENGTH: TO 6M

PRODUCT APPLICATIONS

* carrying water, chemicals, flammable gases, slurries, and other plumbing substances

No：	DIAMETER	THICKNESS	KG/ 6M	No：	DIAMETER	THICKNESS	KG/ 6M
1	1/4”	0.90mm	0.79	32	1 1/8”	1.50mm	6.58
2	1/4”	1.20mm	1.00	33	1 1/8”	3.00mm	12.43
3	1/4”	1.50mm	1.18	34	1 1/4”	1.20mm	5.94
4	5/16”	0.50mm	0.60	35	1 1/4”	1.50mm	7.35
5	5/16”	0.90mm	1.03	36	1 1/4”	3.00mm	13.97
6	5/16”	1.20mm	1.38	37	1 1/2”	1.20mm	7.17
7	5/16”	1.50mm	1.56	38	1 1/2”	1.50mm	8.89
8	3/8”	0.50mm	0.73	39	1 1/2”	3.00mm	17.05
9	3/8”	0.90mm	1.26	40	1 3/4”	1.20mm	8.41
10	3/8”	1.20mm	1.62	41	1 3/4”	1.50mm	10.43
11	3/8”	1.50mm	1.95	42	1 3/4”	3.00mm	20.14
12	1/2”	0.90mm	1.72	43	2”	1.20mm	9.64
13	1/2”	1.20mm	2.23	44	2”	1.50mm	11.96
14	1/2”	1.50mm	2.72	45	2”	3.00mm	23.22
15	1/2”	3.00mm	4.71	46	2 1/4”	1.50mm	13.52
16	5/8”	0.80mm	1.95	47	2 1/4”	3.00mm	26.31
17	5/8”	1.20mm	2.85	48	2 1/2”	1.50mm	15.06
18	5/8	1.50mm	3.49	49	2 1/2”	3.00mm	29.39
19	5/8”	3.00mm	6.26	50	2 3/4”	3.00mm	32.48
20	3/4”	0.90mm	2.65	51	3”	1.50mm	18.15
21	3/4”	1.20mm	3.47	52	3”	3.00mm	35.56
22	3/4”	1.50mm	4.26	53	3 1/4”	3.00mm	38.65
23	3/4”	3.00mm	7.80	54	3 1/2”	3.00mm	41.73
24	21.3mm	2.70mm		55	4”	3.00mm	47.90
25	7/8”	1.20mm	4.09	56	2”	4.76mm	186.40
26	7/8”	1.50mm	5.03	57	2 1/4”	4.76mm	209.72
27	7/8”	3.00mm	9.34	58	2 1/2”	4.76mm	233.00
28	1”	1.20mm	4.70	59	2 3/4”	4.76mm	269.79
29	1”	1.50mm	5.80	60	3”	4.76mm	279.61
30	1”	3.00mm	10.88	61	3 1/2”	3/16”	326.20
31	11/8”	1.20mm	5.32	62	4”	3/16”	372.80

Aluminium Plate

Aluminium plates are the result of basic raw-form aluminium being pressed and rolled into panel form under high pressure. An alloy having high mechanical stress, low or high strength but excellent in formability, weldability, and corrosion resistance, high conductibility of electricity and heat.

Product Standard, Specifications and Grade

Series	Description	Feature
1000	1100 representative series aluminum plate is also known as pure aluminum, in the series in 1xxx series belongs to all the aluminium quantity of a maximum number of series. Purity can achieve 99.00% above.	Low strength but excellent in formability and weldability, corrosion resistance, high conductibility of electricity and heat.
5000	5xxx series representatives 5052, 5083. The 5000 series aluminum alloy aluminum belong to the more commonly used series, the main elements for magnesium, with magnesium in the amount between 3-5%. And can be called aluminum magnesium alloy. Key features for low density, high tensile strength, elongation rate is high. In the same area under the weight of the magnesium alloy aluminum less than other series.	Excellent corrosion resistance and weld ability together with easy to process and weld and superior hardness & heatproof can be anodized for increased corrosion resistance
6000	6xxx series represents 6061 mainly contain magnesium and silicon of two elements, so focused on the 4000 series and the advantages of the 5000 series 6061 is a cold treatment aluminum forging products, apply to fight against corrosion, oxidizing demanding applications.	Easy to process, good corrosion resistance, high toughness and processed without distortion after heat-treatable, superior surface treatment
7000	7000 aluminum alloy is another common alloy, wide variety. It contains zinc and magnesium. The best strength in the common aluminum alloy is 7075 alloy, but it can’t be welded, and its corrosion resistance is rather poor, many manufacturing parts with CNC cutting is 7075 alloy.	7000 series is high tensile to process with special alloy

Chemical Composition %
Alloy No.	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	V	Ti	Zr	Al
1100	0.45	0.35	0.05-0.20	0.03	–	–	–	0.01	0.05	–	–	Remainder
5052	0.25	0.4	0.1	0.1	2.2-2.8	0.15-0.35	–	0.1	–	–	–	Remainder
5083	0.4	0.4	0.1	0.40-1.0	4.0-4.9	0.05-0.25	–	0.25	–	0.15	–	Remainder
6061	0.4-0.8	0.7	0.15-0.40	0.15	0.8-1.2	0.04-0.35	–	0.25	–	0.15	–	Remainder
6063	0.2-0.6	0.35	0.1	0.1	0.45-0.90	0.1	–	0.1	–	0.1	–	Remainder
7075	0.4	0.5	1.2-2.0	0.3	2.1-2.9	0.18-0.28	–	5.1-6.1	–	0.2	–	Remainder

Mechanical Properties

Surface Finish

It is a light weight silvery white metal which is ductile and soft.

Size Range

Thickness : 0.3mm – 127mm Width : 4FT, 5FT

Length : Standard is 8ft or 10ft but customize size is available.

Products Application

Building and Infrastructure Engineering
Aerospace and Automotive
Electrical Appliances
Cookware and kitchen utensil
Vessel
Printing and Advertising Boards
Precision Parts
Injection Mould
Electronic Components

Aluminium Flatbar

Aluminum Flat Bars are available in a wide variety of sizes. Aluminum alloy has lightweight, excellent electrical conductivity, and high corrosion resistance, which makes it a good material for applications in medical assembly, aircraft construction, and structural and electrical components.

Grade: 6061 / 6063

Aluminium Round Bar

Aluminium round bar are an essential component in many industrial applications. It is corrosion-resistant, water proof, rustproof. It works very well in low temperatures and retains its toughness and hardness. Aluminium round bar are also used on food processing units, heat exchangers, and other similar industrial applications. It is being more thermal conducive than steel, the aluminium products can be used in both cooling and heating applications. Its nontoxic properties, the metal is extensively used in the manufacture of several cooking utensils and appliances.

Grade: 6061 / 6063

Aluminium Angle Bar

Aluminum angles consist of two legs which is the types of equal or unequal lengths and arranged to form a 90 degree angle. Because of the material strength and lightweight construction, these components are suitable for use in structural and general engineering and manufacturing applications across a wide range of industries, including building, construction, and transportation.

Grade:6061 / 6063

Aluminium Square Bar

Aluminium square bar are an essential component in many industrial applications. It is corrosion-resistant, water proof, rustproof. It works very well in low temperatures and retains its toughness and hardness. Aluminium square bar are also used on food processing units, heat exchangers, and other similar industrial applications. It is being more thermal conducive than steel, the aluminium products can be used in both cooling and heating applications. Its nontoxic properties, the metal is extensively used in the manufacture of several cooking utensils and appliances.

Grade: 6061

Aluminium Tubes

Aluminium tubes are an essential component in many industrial applications. It is corrosion-resistant, water proof, rustproof. It works very well in low temperatures and retains its toughness and hardness. It is being more thermal conducive than steel, the aluminium products can be used in both cooling and heating applications. Because of the material strength and lightweight construction, these components are suitable for use in structural and general engineering and manufacturing applications across a wide range of industries, including building, construction, and transportation.

Grade: 6061 / 6063

Aluminium Chequered / Tread Plate

Aluminum chequered / tread plate is widely used in decorative, shipbuilding and architectural applications. Having good forming, drilling and welding ability, Its raised diamond lug pattern provides good slip resistance.

Grade: AA 1100 H14

Size: 1.5MM – 6.0mm Width: 4ft x 8ft / 4ft x 12ft

NO	DIMENSION	WEIGHT PER SHEET (KG)
1	1.5MM X 1219MM X 2438MM	12.98
2	2.0MM X 1219MM X 2438MM	17.31
3	2.5MM X 1219MM X 2438MM	21.64
4	3.0MM X 1219MM X 2438MM	25.97
5	4.0MM X 1219MM X 2438MM	34.62
6	4.5MM X 1219MM X 2438MM	38.95
7	5.0MM X 1219MM X 2438MM	43.28
8	6.0MM X 1219MM X 2438MM	51.94

Our Product

Brass

Introduction

Brass

Description

Why Our Brass?

Variation

Brass Flat Bar

Brass Square Bar

Brass Rod

Brass Hexagon Bar

Brass Plate

Brass Shim

Brass Pipe

Brass Flat Bar

PRODUCTS STANDARD AND SPECIFICATIONS

PRODUCTS APPLICATIONS

SIZE RANGE

Brass Square Bar

PRODUCTS APPLICATIONS

SIZE RANGE

Brass Rod

PRODUCT STANDARD AND APPLICATIONS

PRODUCTS APPLICATIONS

SIZE RANGE

Brass Hexagon Bar

PRODUCT STANDARD AND APPLICATIONS

PRODUCTS APPLICATIONS

SIZE RANGE

Brass Plate

PRODUCTS STANDARD AND APLLICATIONS

PRODUCTS APPLICATIONS

SIZE RANGE

Brass Shim

Brass Pipe

Aluminium Plate

Product Standard, Specifications and Grade

Mechanical Properties

Surface Finish

Size Range

Products Application

Aluminium Flatbar

Aluminium Round Bar

Aluminium Angle Bar

Aluminium Square Bar

Aluminium Tubes

Aluminium Chequered / Tread Plate

Need help?

Don't hesitate to contact us.

Company

Investor Relations